Dockerfile-linux.template

{{
	def version_id:
		# https://www.php.net/phpversion
		# $version_id = $major_version * 10000 + $minor_version * 100 + $release_version;
		sub("[a-zA-Z].*$"; "")
		| split(".")
		| (
			(.[0] // 0 | tonumber) * 10000
			+ (.[1] // 0 | tonumber) * 100
			+ (.[2] // 0 | tonumber)
		)
	;
	def is_alpine:
		env.from | startswith("alpine")
	;
	def rcVersion:
		env.version | rtrimstr("-rc")
	;
	def clean_apt:
		# TODO once bookworm is EOL, remove this and just hard-code "apt-get dist-clean" instead
		if env.from | contains("bookworm") then
			"rm -rf /var/lib/apt/lists/*"
		else "apt-get dist-clean" end
	;
	def need_patch_18743:
		# https://github.com/docker-library/php/pull/1580
		# https://github.com/php/php-src/issues/18743 "Incompatibility in Inline TLS Assembly on Alpine 3.22 with zend_jit_ir.c"
		env.variant == "zts"
		and is_alpine
		and IN(rcVersion; "8.2")
	;
	def install_pear_pecl:
		# https://github.com/docker-library/php/issues/1554
		IN(rcVersion; "8.2", "8.3", "8.4", "8.5")
-}}
FROM {{ env.from }}

{{ if is_alpine then "" else ( -}}
# prevent Debian's PHP packages from being installed
# https://github.com/docker-library/php/pull/542
RUN set -eux; \
	{ \
		echo 'Package: php*'; \
		echo 'Pin: release *'; \
		echo 'Pin-Priority: -1'; \
	} > /etc/apt/preferences.d/no-debian-php

{{ ) end -}}
# dependencies required for running "phpize"
{{ if is_alpine then ( -}}
# these get automatically installed and removed by "docker-php-ext-*" (unless they're already installed)
{{ ) else ( -}}
# (see persistent deps below)
{{ ) end -}}
ENV PHPIZE_DEPS \
		autoconf \
		dpkg-dev {{ if is_alpine then "dpkg " else "" end }}\
		file \
		g++ \
		gcc \
		libc-dev \
		make \
		{{ if is_alpine then "pkgconf" else "pkg-config" end }} \
		re2c

# persistent / runtime deps
{{ if is_alpine then ( -}}
RUN apk add --no-cache \
		ca-certificates \
		curl \
		openssl \
		tar \
		xz

# ensure www-data user exists
RUN set -eux; \
	adduser -u 82 -D -S -G www-data www-data
# 82 is the standard uid/gid for "www-data" in Alpine
# https://git.alpinelinux.org/aports/tree/main/apache2/apache2.pre-install?h=3.14-stable
# https://git.alpinelinux.org/aports/tree/main/lighttpd/lighttpd.pre-install?h=3.14-stable
# https://git.alpinelinux.org/aports/tree/main/nginx/nginx.pre-install?h=3.14-stable
{{ ) else ( -}}
RUN set -eux; \
	apt-get update; \
	apt-get install -y --no-install-recommends \
		$PHPIZE_DEPS \
		ca-certificates \
		curl \
		xz-utils \
	; \
	{{ clean_apt }}
{{ ) end -}}

ENV PHP_INI_DIR /usr/local/etc/php
RUN set -eux; \
	mkdir -p "$PHP_INI_DIR/conf.d"; \
# allow running as an arbitrary user (https://github.com/docker-library/php/issues/743)
	[ ! -d /var/www/html ]; \
	mkdir -p /var/www/html; \
	chown www-data:www-data /var/www/html; \
	chmod 1777 /var/www/html

{{ if env.variant == "apache" then ( -}}
ENV APACHE_CONFDIR /etc/apache2
ENV APACHE_ENVVARS $APACHE_CONFDIR/envvars

RUN set -eux; \
	apt-get update; \
	apt-get install -y --no-install-recommends apache2; \
	{{ clean_apt }}; \
	\
# generically convert lines like
#   export APACHE_RUN_USER=www-data
# into
#   : ${APACHE_RUN_USER:=www-data}
#   export APACHE_RUN_USER
# so that they can be overridden at runtime ("-e APACHE_RUN_USER=...")
	sed -ri 's/^export ([^=]+)=(.*)$/: ${\1:=\2}\nexport \1/' "$APACHE_ENVVARS"; \
	\
# setup directories and permissions
	. "$APACHE_ENVVARS"; \
	for dir in \
		"$APACHE_LOCK_DIR" \
		"$APACHE_RUN_DIR" \
		"$APACHE_LOG_DIR" \
# https://salsa.debian.org/apache-team/apache2/-/commit/b97ca8714890ead1ba6c095699dde752e8433205
		"$APACHE_RUN_DIR/socks" \
	; do \
		rm -rvf "$dir"; \
		mkdir -p "$dir"; \
		chown "$APACHE_RUN_USER:$APACHE_RUN_GROUP" "$dir"; \
# allow running as an arbitrary user (https://github.com/docker-library/php/issues/743)
		chmod 1777 "$dir"; \
	done; \
	\
# delete the "index.html" that installing Apache drops in here
	rm -rvf /var/www/html/*; \
	\
# logs should go to stdout / stderr
	ln -sfT /dev/stderr "$APACHE_LOG_DIR/error.log"; \
	ln -sfT /dev/stdout "$APACHE_LOG_DIR/access.log"; \
	ln -sfT /dev/stdout "$APACHE_LOG_DIR/other_vhosts_access.log"; \
	chown -R --no-dereference "$APACHE_RUN_USER:$APACHE_RUN_GROUP" "$APACHE_LOG_DIR"

# Apache + PHP requires preforking Apache for best results
RUN a2dismod mpm_event && a2enmod mpm_prefork

# PHP files should be handled by PHP, and should be preferred over any other file type
RUN { \
		echo '<FilesMatch \.php$>'; \
		echo '\tSetHandler application/x-httpd-php'; \
		echo '</FilesMatch>'; \
		echo; \
		echo 'DirectoryIndex disabled'; \
		echo 'DirectoryIndex index.php index.html'; \
		echo; \
		echo '<Directory /var/www/>'; \
		echo '\tOptions -Indexes'; \
		echo '\tAllowOverride All'; \
		echo '</Directory>'; \
	} | tee "$APACHE_CONFDIR/conf-available/docker-php.conf" \
	&& a2enconf docker-php

{{ ) else "" end -}}
# Apply stack smash protection to functions using local buffers and alloca()
# Make PHP's main executable position-independent (improves ASLR security mechanism, and has no performance impact on x86_64)
# Enable optimization (-O2)
# Enable linker optimization (this sorts the hash buckets to improve cache locality, and is non-default)
# https://github.com/docker-library/php/issues/272
# -D_LARGEFILE_SOURCE and -D_FILE_OFFSET_BITS=64 (https://www.php.net/manual/en/intro.filesystem.php)
ENV PHP_CFLAGS="-fstack-protector-strong -fpic -fpie -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
ENV PHP_CPPFLAGS="$PHP_CFLAGS"
ENV PHP_LDFLAGS="-Wl,-O1 -pie"

ENV GPG_KEYS {{
	{
		# https://www.php.net/gpg-keys.php
		# https://www.php.net/downloads.php

		"8.6": [
			# https://wiki.php.net/todo/php86#release_managers
			# https://www.php.net/gpg-keys.php#gpg-8.6
			"D95C 03BC 702B E951 5344  AE33 74E4 4BC9 0677 01A5", # daniels
			"0168 95DE 9A47 5111 D537  A6E6 9134 FF30 BC5A 99B5", # mbeccati
			"5CFF 17B6 4DC1 C244 F5D0  EAC3 E435 35E2 EB19 010E"  # svpernova09
		],

		"8.5": [
			# https://wiki.php.net/todo/php85#release_managers
			# https://www.php.net/gpg-keys.php#gpg-8.5
			"1198 C011 7593 497A 5EC5  C199 286A F1F9 8974 69DC", # pierrick
			"49D9 AF6B C72A 80D6 6917  19C8 AA23 F5BE 9C70 97D4", # edorian
			"D95C 03BC 702B E951 5344  AE33 74E4 4BC9 0677 01A5"  # daniels
		],

		"8.4": [
			# https://wiki.php.net/todo/php84#release_managers
			# https://www.php.net/gpg-keys.php#gpg-8.4
			"AFD8 691F DAED F03B DF6E  4605 63F1 5A9B 7153 76CA", # ericmann
			"9D7F 99A0 CB8F 05C8 A695  8D62 56A9 7AF7 600A 39A6", # calvinb
			"0616 E93D 95AF 4712 43E2  6761 7704 26E1 7EBB B3DD"  # saki
		],

		"8.3": [
			# https://wiki.php.net/todo/php83#release_managers
			# https://www.php.net/gpg-keys.php#gpg-8.3
			"1198 C011 7593 497A 5EC5  C199 286A F1F9 8974 69DC", # pierrick
			"C28D937575603EB4ABB725861C0779DC5C0A9DE4",           # bukka
			"AFD8 691F DAED F03B DF6E  4605 63F1 5A9B 7153 76CA"  # ericmann
		],

		"8.2": [
			# https://wiki.php.net/todo/php82#release_managers
			# https://www.php.net/gpg-keys.php#gpg-8.2
			"39B6 4134 3D8C 104B 2B14  6DC3 F9C3 9DC0 B969 8544", # ramsey
			"E609 13E4 DF20 9907 D8E3  0D96 659A 97C9 CF2A 795A", # sergey
			"1198 C011 7593 497A 5EC5  C199 286A F1F9 8974 69DC"  # pierrick
		],
	}[rcVersion] // error("missing GPG keys for " + rcVersion)
	| map(gsub(" "; ""))
	| join(" ")
}}

ENV PHP_VERSION {{ .version }}
ENV PHP_URL="{{ .url }}" PHP_ASC_URL="{{ .ascUrl // "" }}"
ENV PHP_SHA256="{{ .sha256 // "" }}"

RUN set -eux; \
	\
{{ if is_alpine then ( -}}
	apk add --no-cache --virtual .fetch-deps gnupg; \
{{ ) else ( -}}
	savedAptMark="$(apt-mark showmanual)"; \
	apt-get update; \
	apt-get install -y --no-install-recommends gnupg; \
	{{ clean_apt }}; \
{{ ) end -}}
	\
	mkdir -p /usr/src; \
	cd /usr/src; \
	\
	curl -fsSL -o php.tar.xz "$PHP_URL"; \
	\
	if [ -n "$PHP_SHA256" ]; then \
		echo "$PHP_SHA256 *php.tar.xz" | sha256sum -c -; \
	fi; \
	\
	curl -fsSL -o php.tar.xz.asc "$PHP_ASC_URL"; \
	export GNUPGHOME="$(mktemp -d)"; \
	for key in $GPG_KEYS; do \
		gpg --batch --keyserver keyserver.ubuntu.com --recv-keys "$key"; \
	done; \
	gpg --batch --verify php.tar.xz.asc php.tar.xz; \
	gpgconf --kill all; \
	rm -rf "$GNUPGHOME"; \
	\
{{ if is_alpine then ( -}}
	apk del --no-network .fetch-deps
{{ ) else ( -}}
	apt-mark auto '.*' > /dev/null; \
	apt-mark manual $savedAptMark > /dev/null; \
	apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false
{{ ) end -}}

COPY docker-php-source /usr/local/bin/

RUN set -eux; \
{{ if is_alpine then ( -}}
	apk add --no-cache --virtual .build-deps \
{{ ) else ( -}}
	\
	savedAptMark="$(apt-mark showmanual)"; \
	apt-get update; \
	apt-get install -y --no-install-recommends \
{{ ) end -}}
{{
	[
		[ if is_alpine then
			# alpine packages
			"$PHPIZE_DEPS",
			"argon2-dev",
			"coreutils",
			"curl-dev",
			"gnu-libiconv-dev", # https://www.php.net/manual/en/intro.iconv.php "it'd be a good idea to install the GNU libiconv library"
			"libsodium-dev",
			"libxml2-dev",
			"openssl-dev",
			# https://github.com/docker-library/php/pull/1580 (18743)
			if need_patch_18743 then "patch", "patchutils" else empty end,
			"readline-dev",
			"sqlite-dev",
			# https://github.com/docker-library/php/issues/888
			"linux-headers",
			# oniguruma is part of mbstring in php 7.4+
			if install_pear_pecl then "oniguruma-dev" else empty end
		else
			# debian packages
			if env.variant == "apache" then "apache2-dev" else empty end,
			"libargon2-dev",
			"libcurl4-openssl-dev",
			"libreadline-dev",
			"libsodium-dev",
			"libsqlite3-dev",
			"libssl-dev",
			"libxml2-dev",
			"zlib1g-dev",
			# oniguruma is part of mbstring in php 7.4+
			if install_pear_pecl then "libonig-dev" else empty end
		end ] | sort[] | (
-}}
		{{ . }} \
{{
		)
	] | add
-}}
	; \
	\
{{ if is_alpine then ( -}}
# make sure musl's iconv doesn't get used (https://www.php.net/manual/en/intro.iconv.php)
	rm -vf /usr/include/iconv.h; \
	\
{{ ) else "" end -}}
	export \
		CFLAGS="$PHP_CFLAGS" \
		CPPFLAGS="$PHP_CPPFLAGS" \
		LDFLAGS="$PHP_LDFLAGS" \
# https://github.com/php/php-src/blob/d6299206dd828382753453befd1b915491b741c6/configure.ac#L1496-L1511
		PHP_BUILD_PROVIDER='https://github.com/docker-library/php' \
		PHP_UNAME='Linux - Docker' \
	; \
	docker-php-source extract; \
	cd /usr/src/php; \
{{ if need_patch_18743 then ( -}}
	# https://github.com/php/php-src/issues/18743 "Incompatibility in Inline TLS Assembly on Alpine 3.22 with zend_jit_ir.c"
	# https://github.com/docker-library/php/pull/1580
	curl -fL 'https://github.com/php/php-src/commit/b3c8afe272a6919248986c703c2e1defc73ff707.patch?full_index=1' -o 18743.patch; \
	echo 'b334f73434c9732a4b27a42eb5d417e10df842e854c02a3e753b2479f8978bf5 *18743.patch' | sha256sum -c -; \
	filterdiff -x '*/NEWS' 18743.patch | patch -p1; \
	rm 18743.patch; \
{{ ) else "" end -}}
	gnuArch="$(dpkg-architecture --query DEB_BUILD_GNU_TYPE)"; \
{{ if is_alpine then "" else ( -}}
	debMultiarch="$(dpkg-architecture --query DEB_BUILD_MULTIARCH)"; \
# https://bugs.php.net/bug.php?id=74125
	if [ ! -d /usr/include/curl ]; then \
		ln -sT "/usr/include/$debMultiarch/curl" /usr/local/include/curl; \
	fi; \
{{ ) end -}}
	case "$gnuArch" in \
		'i686-linux-'*) \
			# php zend jit assumes SSE registers, xmm0-7, are available (and "Pentium4"/SSE2 is a reasonable baseline)
			# https://github.com/php/php-src/pull/22832
			# so, allow it and use SSE/SSE2 floating-point unit instead of the legacy stack
			export \
				CFLAGS="$CFLAGS -msse2 -mfpmath=sse" \
				CPPFLAGS="$CPPFLAGS -msse2 -mfpmath=sse" \
			; \
			;; \
	esac; \
	test "$PHP_INI_DIR" != "${PHP_INI_DIR%/php}"; \
	./configure \
		--build="$gnuArch" \
		--sysconfdir="${PHP_INI_DIR%/php}" \
		--with-config-file-path="$PHP_INI_DIR" \
		--with-config-file-scan-dir="$PHP_INI_DIR/conf.d" \
		\
# make sure invalid --configure-flags are fatal errors instead of just warnings
		--enable-option-checking=fatal \
		\
# https://github.com/docker-library/php/issues/439
		--with-mhash \
		\
{{ if rcVersion | IN("8.2", "8.3", "8.4", "8.5") then ( -}}
# https://github.com/docker-library/php/issues/822
		--with-pic \
		\
{{ ) elif env.variant == "apache" then ( -}}
# https://github.com/docker-library/php/issues/822
# https://github.com/php/php-src/pull/21067/changes#diff-4b9db5b77bcd56aa33b310dc44c8bc99c729c9abb195df2e98e6985b81289ae8R130
		--enable-pic \
		\
{{ ) else ( -}}
# no --enable-pic; forcing PIC also removes -fpie from executable objects, preventing local-exec TLS: https://github.com/docker-library/php/pull/1692
{{ ) end -}}
{{ if install_pear_pecl then ( -}}
# --enable-mbstring is included here because otherwise there's no way to get pecl to use it properly (see https://github.com/docker-library/php/issues/195)
		--enable-mbstring \
{{ ) else "" end -}}
# --enable-mysqlnd is included here because it's harder to compile after the fact than extensions are (since it's a plugin for several extensions, not an extension in itself)
		--enable-mysqlnd \
# https://wiki.php.net/rfc/argon2_password_hash
		--with-password-argon2 \
# https://wiki.php.net/rfc/libsodium
		--with-sodium=shared \
# always build against system sqlite3 (https://github.com/php/php-src/commit/6083a387a81dbbd66d6316a3a12a63f06d5f7109)
		--with-pdo-sqlite=/usr \
		--with-sqlite3=/usr \
		\
		--with-curl \
		--with-iconv{{ if is_alpine then "=/usr" else "" end }} \
		--with-openssl \
		--with-readline \
		--with-zlib \
		\
{{ if env.variant | IN("cli", "zts") then ( -}}
# https://github.com/docker-library/php/pull/1259
		--enable-phpdbg \
		--enable-phpdbg-readline \
{{ ) else ( -}}
# https://github.com/bwoebi/phpdbg-docs/issues/1#issuecomment-163872806 ("phpdbg is primarily a CLI debugger, and is not suitable for debugging an fpm stack.")
		--disable-phpdbg \
{{ ) end -}}
		\
{{ if install_pear_pecl then ( -}}
# in PHP 7.4+, the pecl/pear installers are officially deprecated (requiring an explicit "--with-pear")
		--with-pear \
		\
{{ ) else "" end -}}
{{ if rcVersion | IN("8.2") then ( -}}
# bundled pcre does not support JIT on riscv64 until 10.41 (php 8.3+)
# https://github.com/PCRE2Project/pcre2/commits/pcre2-10.41/src/sljit/sljitNativeRISCV_64.c
# https://github.com/php/php-src/tree/php-8.3.0/ext/pcre/pcre2lib
{{ if is_alpine then ( -}}
		$(test "$gnuArch" = 'riscv64-linux-musl' && echo '--without-pcre-jit') \
{{ ) else ( -}}
		$(test "$gnuArch" = 'riscv64-linux-gnu' && echo '--without-pcre-jit') \
{{ ) end -}}
{{ ) else "" end -}}
{{ if is_alpine then "" else ( -}}
		--with-libdir="lib/$debMultiarch" \
{{ ) end -}}
{{ # https://github.com/docker-library/php/issues/280 -}}
{{ if env.variant | IN("cli", "zts") then "" else ( -}}
		\
		--disable-cgi \
{{ ) end -}}
{{ # zts + alpine special cased for embed (otherwise zts is effectively cli): https://github.com/docker-library/php/pull/1342 -}}
{{ if env.variant == "zts" or (env.variant == "cli" and ((rcVersion | version_id) >= 80600 or (is_alpine | not))) then ( -}}
		\
# https://github.com/docker-library/php/pull/939#issuecomment-730501748
		--enable-embed \
{{ ) else "" end -}}
{{ if env.variant == "apache" then ( -}}
		\
		--with-apxs2 \
{{ ) elif env.variant == "fpm" then ( -}}
		\
		--enable-fpm \
		--with-fpm-user=www-data \
		--with-fpm-group=www-data \
{{ ) else "" end -}}
{{ if env.variant == "zts" or (rcVersion | version_id) >= 80600 then ( -}}
		\
		--enable-zts \
# https://externals.io/message/118859
		--disable-zend-signals \
{{ if rcVersion | IN("8.2") then ( -}}
		--enable-zend-max-execution-timers \
{{ ) else "" end -}}
{{ ) else "" end -}}
{{ if env.DOCKER_PHP_ENABLE_DEBUG then ( -}}
{{ # DOCKER_PHP_ENABLE_DEBUG is not used or supported by official-images; this is for users who want to build their own php image with debug enabled -}}
{{ # example usage to regenerate Dockerfiles with debug enabled: "DOCKER_PHP_ENABLE_DEBUG=1 ./apply-templates" -}}
		--enable-debug \
{{ ) else "" end -}}
	; \
	make -j "$(nproc)"; \
	find -type f -name '*.a' -delete; \
	make install; \
{{ if env.DOCKER_PHP_ENABLE_DEBUG then "" else ( -}}
{{ # DOCKER_PHP_ENABLE_DEBUG is not used by official-images -}}
	find \
		/usr/local \
		-type f \
		-perm '/0111' \
		-exec sh -euxc ' \
			strip --strip-all "$@" || : \
		' -- '{}' + \
	; \
{{ ) end -}}
	make clean; \
	\
# https://github.com/docker-library/php/issues/692 (copy default example "php.ini" files somewhere easily discoverable)
	cp -v php.ini-* "$PHP_INI_DIR/"; \
	\
	cd /; \
	docker-php-source delete; \
	\
{{ if is_alpine then ( -}}
	runDeps="$( \
		scanelf --needed --nobanner --format '%n#p' --recursive /usr/local \
			| tr ',' '\n' \
			| sort -u \
			| awk 'system("[ -e /usr/local/lib/" $1 " ]") == 0 { next } { print "so:" $1 }' \
	)"; \
	apk add --no-cache $runDeps; \
	\
	apk del --no-network .build-deps; \
{{ ) else ( -}}
# reset apt-mark's "manual" list so that "purge --auto-remove" will remove all build dependencies
	apt-mark auto '.*' > /dev/null; \
	[ -z "$savedAptMark" ] || apt-mark manual $savedAptMark; \
	find /usr/local -type f -executable -exec ldd '{}' ';' \
		| awk '/=>/ { so = $(NF-1); if (index(so, "/usr/local/") == 1) { next }; gsub("^/(usr/)?", "", so); printf "*%s\n", so }' \
		| sort -u \
		| xargs -rt dpkg-query --search \
# https://manpages.debian.org/trixie/dpkg/dpkg-query.1.en.html#S (we ignore diversions and it'll be really unusual for more than one package to provide any given .so file)
		| awk 'sub(":$", "", $1) { print $1 }' \
		| sort -u \
		| xargs -r apt-mark manual \
	; \
	apt-get purge -y --auto-remove -o APT::AutoRemove::RecommendsImportant=false; \
	{{ clean_apt }}; \
{{ ) end -}}
	\
{{ if install_pear_pecl then ( -}}
# update pecl channel definitions https://github.com/docker-library/php/issues/443
	pecl update-channels; \
	rm -rf /tmp/pear ~/.pearrc; \
	\
{{ ) else "" end -}}
# smoke test
	php --version

COPY docker-php-ext-* docker-php-entrypoint /usr/local/bin/

{{ if IN(rcVersion; "8.2", "8.3", "8.4") then ( -}}
# enable OPcache by default (https://wiki.php.net/rfc/make_opcache_required)
RUN docker-php-ext-enable opcache

{{ ) else "" end -}}
# sodium was built as a shared module (so that it can be replaced later if so desired), so let's enable it too (https://github.com/docker-library/php/issues/598)
RUN docker-php-ext-enable sodium

ENTRYPOINT ["docker-php-entrypoint"]
{{ if env.variant == "apache" then ( -}}
# https://httpd.apache.org/docs/2.4/stopping.html#gracefulstop
STOPSIGNAL SIGWINCH

COPY apache2-foreground /usr/local/bin/
WORKDIR /var/www/html

EXPOSE 80
{{ ) elif env.variant == "fpm" then ( -}}
WORKDIR /var/www/html

RUN set -eux; \
	cd "${PHP_INI_DIR%/php}"; \
	\
	cp -v php-fpm.conf.default php-fpm.conf; \
	cp -v php-fpm.d/www.conf.default php-fpm.d/www.conf; \
	\
	# comment out localhost-only listen address
	grep -E '^listen = 127.0.0.1:9000' php-fpm.d/www.conf; \
	sed -ri 's/^(listen = 127.0.0.1:9000)/;\1/' php-fpm.d/www.conf; \
	grep -E '^;listen = 127.0.0.1:9000' php-fpm.d/www.conf; \
	\
	{ \
		echo '[global]'; \
		echo 'error_log = /proc/self/fd/2'; \
		echo; echo '; https://github.com/docker-library/php/pull/725#issuecomment-443540114'; echo 'log_limit = 8192'; \
		echo; \
		echo '[www]'; \
		echo '; php-fpm closes STDOUT on startup, so sending logs to /proc/self/fd/1 does not work.'; \
		echo '; https://bugs.php.net/bug.php?id=73886'; \
		echo 'access.log = /proc/self/fd/2'; \
		echo; \
		echo 'clear_env = no'; \
		echo; \
		echo '; Ensure worker stdout and stderr are sent to the main error log.'; \
		echo 'catch_workers_output = yes'; \
		echo 'decorate_workers_output = no'; \
		echo; \
		echo '; default listen address for easy override in later php-fpm.d/*.conf files'; \
		echo 'listen = 9000'; \
	} | tee php-fpm.d/docker.conf; \
	{ \
		echo '[global]'; \
		echo 'daemonize = no'; \
{{ if rcVersion | IN("8.2", "8.3", "8.4", "8.5") then ( -}}
		echo; \
		echo '; the [www] ini section below is for backwards compatibility and will be removed in 8.6+'; \
		echo '[www]'; \
{{ ) else "" end -}}
	} | tee php-fpm.d/zz-docker.conf; \
	mkdir -p "$PHP_INI_DIR/conf.d"; \
	{ \
		echo '; https://github.com/docker-library/php/issues/878#issuecomment-938595965'; \
		echo 'fastcgi.logging = Off'; \
	} > "$PHP_INI_DIR/conf.d/docker-fpm.ini"

# Override stop signal to stop process gracefully
# https://github.com/php/php-src/blob/17baa87faddc2550def3ae7314236826bc1b1398/sapi/fpm/php-fpm.8.in#L163
STOPSIGNAL SIGQUIT

EXPOSE 9000
{{ ) else "" end -}}
CMD {{ env.cmd }}